Brown Limewash Colors

Brown limewash spans light sandy taupes and weathered driftwood to rich walnut, cocoa and deep espresso. Where flat brown latex can look heavy, the lime finish has a suede-like variation that keeps dark browns from turning muddy. It sits easily with natural timber, stone and leather, in a den, a library or a living room.

Breathable on masonry and plaster, with no surface film to peel. Zero-VOC, with no synthetic binders, made in the USA.

Use brown and tan for a rustic, farmhouse look, or as a grounding contrast in a modern, minimal room: from soft La Duna and Camello to deep Cacao and burnished Copper. Earthy browns are a 2026 favorite; see our 2026 color picks.

Sample first. Limewash dries much lighter than it looks wet, so test a sample jar or hand-painted sample card in your own light before you buy. See all color samples.

Browse the 36 Signature limewash colors, 51 including the 16 Light & Airy whites.

Bare brick, stone, stucco and plaster take limewash directly. Drywall and painted walls need one coat of Lime-Prep Primer first; it can be painted over in about 2 hours at 70°F with moderate humidity. Brush on two coats, plus an optional third. Ideally leave 24 hours between coats, though you can recoat once the wall is dry. A gallon covers about 300 sq ft over two coats.

Mix Limewash Densifier into the final coat on walls people touch. It reduces chalking and the need for a sealer, but it doesn't make the wall wipeable. For a wipeable surface, add Matte Protective Sealer over densified limewash only: two coats, 2 hours apart, starting at least 24 hours after the final coat. Don't overbrush. It breathes rather than fully sealing, so the wall is wipeable, not washable, and highly pigmented materials can still stain it.

The limewash wall prep guide · Sealer vs. densifier